Forum
omoto
10 posts
• Page 1 of 1
omoto
just herd the brand OMOTO is about to be released in NZ with the new generation models which have been reworked and made lighter compared to the early models good help us
-

Rockfisher - Posts: 756
- Joined: Fri Jan 22, 2010 1:21 pm
Re: omoto
Oh I dont know ... I had a look at a omoto vs10 the other day looked pretty good and felt fine and that reel was at least a year old and had been used hard.
Omoto are makers of lots of other companys reels and are making a range of reels being marketed in the UK called Akios basically abu clones in 6500 and 7000 size with level winds or without .Also have a mag brake option .
I know of a few of those reels being put into the hands of the UK's best casters and having 250 meter casts with them out of the box .
Omoto are makers of lots of other companys reels and are making a range of reels being marketed in the UK called Akios basically abu clones in 6500 and 7000 size with level winds or without .Also have a mag brake option .
I know of a few of those reels being put into the hands of the UK's best casters and having 250 meter casts with them out of the box .
-

Kiwicaster - Posts: 279
- Joined: Thu Feb 25, 2010 7:18 pm
Re: omoto
we shall see next week,may flick some your way soon,
-

Rockfisher - Posts: 756
- Joined: Fri Jan 22, 2010 1:21 pm
Re: omoto
The future of this zillionth release of Omoto in NZ depends solely on the importer/ wholesalers that are running them.
We saw this with Okuma and believe it or not, Okuma is still a crap stigma brand for many.....but get this....
Fresh announcment from EFFTEX 2010, OKUMA Andros voted Best New Product Award!!
Like I said, much is to do with who is driving it and last I heard is that the original NZ wholesalers of Okuma, were handling Omoto, unless that has recently changed????
Does your info reveal a NZ agent????
We saw this with Okuma and believe it or not, Okuma is still a crap stigma brand for many.....but get this....
Fresh announcment from EFFTEX 2010, OKUMA Andros voted Best New Product Award!!
Like I said, much is to do with who is driving it and last I heard is that the original NZ wholesalers of Okuma, were handling Omoto, unless that has recently changed????
Does your info reveal a NZ agent????
-

fishy bishy - Posts: 14
- Joined: Mon Jul 19, 2010 9:06 pm
- Location: Levin
Re: omoto
good info,new agent/dealer multi national
-

Rockfisher - Posts: 756
- Joined: Fri Jan 22, 2010 1:21 pm
Re: omoto
...and the new agent is.......... (drum roll...)
[oh crap, I just re-read Sherppa's comment and had a sudden HORRIFYING sinking feeling that the "new agent/MULTI NATIONAL ....might be (gulp) a company called Pure something.....?????]
[oh crap, I just re-read Sherppa's comment and had a sudden HORRIFYING sinking feeling that the "new agent/MULTI NATIONAL ....might be (gulp) a company called Pure something.....?????]
Last edited by fishy bishy on Fri Jul 23, 2010 3:58 pm, edited 1 time in total.
-

fishy bishy - Posts: 14
- Joined: Mon Jul 19, 2010 9:06 pm
- Location: Levin
Re: omoto
Copied from Pfleuger:
These are brilliant reels, only an odd name...... hard to find the perfect reel boy....
Policansky are the pioneers of light-tackle lever-drag reels. The first Policansky lever drag was made in 1962 and their reels incorporate over 40 years of lever-drag manufacturing experience.
All Policansky reels are made to rigid machining specifications and from the best materials available.
Perfectly balanced spools made from one piece of aluminium, Stainless steel crank, Stainless steel drag lever, Stainless steel gear and spool shafts, Manganese bronze helical gears, Minimum clearance between spool and side plates, Spool and side plate rings made of marine anodised aluminium,
The Monarch 2000 series incorporates a new drag design with important features:
A new friction material is used for bigger drag washers that float between a stainless steel brake plate and an enlarged braking area on the spool flange. The brake plate and pinion gear are assembled as one integral unit enabling precise alignment of the brake plate and spool flange. We have altered the pitch of the feed that moves the brake plate towards the spool so that a bigger range of drag from free spool to full drag is achieved.
The combination of these features gives you the smoothest drag ever and one that will catch fish after fish and still retains its silky smooth stopping power.
A major feature of the Monarch 2000 series drag is the easy breakaway that is so important for trolling and live bait fishing. No more break-offs when that yellow-fin snatches your lure - the drag will yield to its pre-programmed setting without a shudder.
On the two bigger models (2018 and 2020) the whole drag system has been increased in diameter to give the reels more stopping power.
Policansky have improved the free run of the spool on the two small 2006 and 2010 models making them even better casting and spinning reels than their predecessors.
Finally the reel has been uniquely turned out in a black and gold livery. Distinguishing colours for a distinguished reel that will be used by discriminating fisherman.
These are brilliant reels, only an odd name...... hard to find the perfect reel boy....
Policansky are the pioneers of light-tackle lever-drag reels. The first Policansky lever drag was made in 1962 and their reels incorporate over 40 years of lever-drag manufacturing experience.
All Policansky reels are made to rigid machining specifications and from the best materials available.
Perfectly balanced spools made from one piece of aluminium, Stainless steel crank, Stainless steel drag lever, Stainless steel gear and spool shafts, Manganese bronze helical gears, Minimum clearance between spool and side plates, Spool and side plate rings made of marine anodised aluminium,
The Monarch 2000 series incorporates a new drag design with important features:
A new friction material is used for bigger drag washers that float between a stainless steel brake plate and an enlarged braking area on the spool flange. The brake plate and pinion gear are assembled as one integral unit enabling precise alignment of the brake plate and spool flange. We have altered the pitch of the feed that moves the brake plate towards the spool so that a bigger range of drag from free spool to full drag is achieved.
The combination of these features gives you the smoothest drag ever and one that will catch fish after fish and still retains its silky smooth stopping power.
A major feature of the Monarch 2000 series drag is the easy breakaway that is so important for trolling and live bait fishing. No more break-offs when that yellow-fin snatches your lure - the drag will yield to its pre-programmed setting without a shudder.
On the two bigger models (2018 and 2020) the whole drag system has been increased in diameter to give the reels more stopping power.
Policansky have improved the free run of the spool on the two small 2006 and 2010 models making them even better casting and spinning reels than their predecessors.
Finally the reel has been uniquely turned out in a black and gold livery. Distinguishing colours for a distinguished reel that will be used by discriminating fisherman.
-

fishy bishy - Posts: 14
- Joined: Mon Jul 19, 2010 9:06 pm
- Location: Levin
10 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 1 guest
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group

